SV-3000 Data sheet

www.dinacell.com

SV-���� Sensor designed for measuring

beam structure deformation

More information

Crosshead/Beam sensor SV-���� SV-3000's are designed to work with traction and compression. Designed for measuring the load limits in beams of metallic structure deformations (steel beams) or in elevation systems such as elevator or freight lift. Where the variations of the load through the entrance or the exit of load in the cabin, transmits the variation of the beam structure deformation measured by the sensor.

The SV-3000's is easy to install, on a clear part of the load-beam structure. This load weighing system could be used in fi nished lift constructed installation, making it easy to integrate the load limiter in the elevator or freight lift. Setting on a vertical For a complete installation hitch point

This sensor has a cable with USB output or output without connector depending on the limiting device. It is possible to improve the quality of Min. recommended distance the measurement by adding to the installation more than one sensor. For installations that require connecting a set of sensors to a limiter with a single input, assemblies can be formed by attaching these sensors to an (1) INTERFACE. These accessories off er connectorless or USB output, 50 making them compatible with any device,,, regardless of the input type of 142 the limiter... Ø10

Load-bearing structure Setting in horizontal steel beam

(((111))) INTERFACE 28 SV-���� Sensor designed for measuring beam structure deformation Crosshead//Beam sensor SV--33000000''s are designed to work with traction and compression.. Designed for measuring the load limits in beams of metallic structure Ø10 1/3

SV-3000

100

64

82 = 01

82 = = 1 Datasheet Specifications Parameter Units Specifications Model - SV-3000 Nominal Deformation (N.D.) με 3000 Nominal Sensibility (N.S.) mV/V 2 Accuracy - 0.2% Zero balance %N.D. 5 Maximum excitation voltage V 12 Compensated -10 ... +40 (+14 ... +104) Temperature range Operating oC (oF) -20 ... +60 (-4 ... +140) Storage -20 ... +70 (-4 ... +158) Min. Insulation resistance (V.Test = 100V) GΩ 4 Input resistance Ω 350±2 Output resistance Ω 350±2 Maximum deformation %N.D. 150 Type - 4 x 0.14mm2 Ø4 Termination - Wiring connection USB Cable Standard length m 6 Material - Polyurethane (PU) Material - Alloy steel Sensor Surface treatment - Chemical nikel Protection class - IP65 Dimensional drawings (mm) and wiring diagram = = = Ø8 + Exc. Red + Signal Green - Exc. Black - Signal White Shield (GND) 2/3

SV-3000

www.dinacell.com

Dinacell Electrónica S.L. Pol. Ind. Santa Ana, C/ de la Fundición 8 CP 28522 Rivas Vaciamadrid, Madrid, ESPAÑA Tel. (+34) 913 001 435 17/07/2026 5.32 24 Datasheet Product Reference Ref. Connector type Model 004632 Wiring connection SV-3000 009213 USB Accessory: INTERFACE 4 Parameter Units Specifi cations Model - INTERFACE Temperature range oC (oF) -20 ... +60 (-4 ... +140) Casing material - Fireproof V0 16.2 A Protection class - IP50 B Cable type - 4 x 0.22mm2 Ø4 C Standard length m 5 + Ferrita Dimensions in mm USB Input - 6 12 USB A B C Wiring Wiring Cable Output - USB USB connection connection 6 48 69 74 Ref. - 007555 007274 007554 007275 12 84 105 110 For more information Certifi ed company Document Ref: D1064-08 Publication Date: VMFT06.04 Dinacell Electrónica S.L. reserves the right to add, modify and/or delete content of the document without prior notice. The content indicated here should be used as general product information. It should not be interpreted as a guarantee of quality or durability. 3/3