Dinacell products
SV-3000
SV-3000's are designed to work with traction and compression. Designed for measuring the load limits in beams of metallic structure deformations (steel beams) or in elevation systems such as elevator or freight lift. Where the variations of the load through the entrance or the exit of load in the cabin, transmits the variation of the beam structure deformation measured by the sensor.
Catalogs & documents
Use the continuous web edition for reading, search and source-page references. The original file remains available on every document page.
Product information
Official manufacturer details
SV-3000's are designed to work with traction and compression. Designed for measuring the load limits in beams of metallic structure deformations (steel beams) or in elevation systems such as elevator or freight lift. Where the variations of the load through the entrance or the exit of load in the cabin, transmits the variation of the beam structure deformation measured by the sensor.
The SV-3000's is easy to install, on a clear part of the load-beam structure. This load weighing system could be used in finished lift constructed installation, making it easy to integrate the load limiter in the elevator or freight lift.
Main features
Additional information
| Product Type | Load Cell |
|---|---|
| Workplace | Crosshead |
| Nominal Deformation (με) | 3000 |
| Ingress Protection | IP65 |
Documentation and downloads
3D CAD Model
In the same category
Related Products
Dinacell
ADS420
The ADS-420 device is a signal conditionering device for load cells with passive mV output.
Details & documents
Dinacell
BCD-CC
At Dinacell, we have developed BCD connectors designed to measure electrical continuity and enable broken-belt detection
Details & documents
Dinacell
BP
The BP load cell has a wide range of models covering from one ton to forty tons.
Details & documents