BPP-LR undercabin sensor

 

introduction

The BPP-LR sensor is specially designed for the installation and commissioning of the center of the cabin, and because of the designed plate under the sensor, the transmission of vibrations has been prevented and the installation has been made easier. The capacity of this sensor is up to 3000 kg (cabin capacity and cabin weight), which is connected to the VK or RCU control device by a 5-meter USB cable. It is recommended to use this sensor for cabins with low capacity (up to 8 people). The reason for the superiority of the BPP-LR sensor over other types of sensors is that it does not suffer from errors due to rail friction and mechanical movements, the weight of cables and compensating chains, and other factors that prevent correct measurement, and it is recommended to be installed and used on new elevators.

Features

• Made by Dinasel Spain 

• European Union standard

• Has 1 year warranty

• 5 years after-sales service

• 24-hour service and support

• Weight measurement and loading restrictions

• Maximum accuracy in weight measurement

• The sensor is installed under the cabin and the controller is installed above the cabin

• Very easy setting (Persian catalog of setting)

• Advanced design to prevent transmission of mechanical vibrations

• Its installation does not depend on the type of suspension system design

• Weight holder inlet during cabin movement

• "Automatic calibration" without the need to perform a step (specific weight) for final adjustment

• It is recommended to be used for the installation and commissioning of new elevators

 

Electrical specifications 

 

 

• Can be connected to the VK control device and RCU 205

• Very low power consumption of the control device RCU 205  (Energy consumption 2 W)

• Control device RCU 205 It is very low cost and optimal

• The VK control device has 3 output relays and the RCU 205 control device has 2 output relays 

• Serial communication capability on the VK device (optional)

• It has 3 indicator lights of the weight range on the VK device (optional)

• Cabin display output on VK device (optional)

• Analog output on VK device (V, 4 to 20 mA 10 to 0) (optional)

• Very easy wiring and adjustment (Persian catalog of adjustment)

• RCU 205 controller input power source (24 V-DC)

• VK controller input power supply (115~230V-AC)

• Nominal frequency 50 to 60 Hz

• Contact relays V - 3 amps 250

• The input voltage of the holder is 24V ~ 230V - AC / DC

• Device protection class V0 IP-50, fireproof plastic