SWR Data sheet

www.dinacell.com

SWR

Individual sensor for lift

ropes application

CSA B44.1/ASME A17.5

More information

SWR Load sensor for lift ropes

These sensors are installed individually on the lift ropes to measure the load supported on each rope. The SWR retractable central pulley allows to cover a range from diameter 5 up to 13 mm, with their respective nominal load in a single format. One of the most remarkable characteristics of this sensor is the fast and easy installation, by using Dinacell SW Tool or any standard tool. Other of its advantages is the capability of being installed in already fi nished installations. Dinacell SW Tool Standard Commercial Tool For a complete load weighing installation

These sensors have a USB connector output. This feature allows to use multiple-inputs in control unit, as OMEGA Control until, and be able to obtain individual information from each sensor. For installations with the special requirement of connecting a set of sensors to a load limiter with only one input, sets could be conformed with a (1) INTERFACE. This accessory provides a wired or USB output, which makes them suitable with any device, regardless of the load limiter input type.

(((111))) INTERFACE

1/3

SWR

24 25.35 24 15.35 10

701 Datasheet Specifications Parameter Units Specifications Model - SWR Nominal Load (N.L.) kg 200 250 300 350 400 450 550 650 800 Ø Rope - 5 6 6.5 7 8 9 10 11 12 13 Nominal Sensibility (N.S.) mV/V 0.5 ... 2.0 Accuracy - 0.25% Zero balance %mV/V ± 0.20 Maximum excitation voltage V 12 Minimum distance to the socket cm 25 Compensated -10 ... +40 (+14 ... +104) Temperature range Operating oC (oF) -20 ... +60 (-4 ... +140) Storage -20 ... +70 (-4 ... +158) Min. Insulation resistance (V.Test = 100V) GΩ 4 Input resistance Ω 350 ±1.5 Output resistance Ω 350 ±1.5 Safe 120 Load limit %N.L. Without characteristics loss 150 Type - 4 X 0.14 mm2 Ø4.3 Connector - USB Cable Standard length m 0,5 / 2 / 4 Material - Polyurethane (PU) Material - Aluminum Sensor Surface treatment - Anodized Protection class - IP65 Dimensional drawings (mm) and wiring diagram 17.5 13 15.35 + Exc. Red + Signal Green 11 7 - Exc. Black 13 9 5 - Signal White SWR Ø5-13 Shield (GND) Dinacell electrónica 4.5 5.5 16 8 2/3

Datasheet SWR

Product Reference

Ref. Cable (m) Model 007760 0.5 008042 2 SWR 008145 4

Accessory: INTERFACE

Parameter Units Specifi cations Model - INTERFACE

Temperature range oC (oF) -20 ... +60 (-4 ... +140) Casing material - Fireproof V0 Protection class - IP50 Cable type - 4 x 0.22mm2 Ø4

Standard length m 5 + Ferrita Dimensions in mm USB Input - 6 12 USB A B C Wiring Wiring Cable Output - USB USB connection connection 6 48 69 74 Ref. - 007555 007274 007554 007275 12 84 105 110 Accessories: Dinacell SW tool

Ref. 002558

For more information

www.dinacell.com Certifi ed company Dinacell Electrónica S.L. Pol. Ind. Santa Ana, C/ de la Fundición 8 CP 28522 Rivas Vaciamadrid, Madrid, ESPAÑA Tel. (+34) 913 001 435 Document Ref: D1070-06 Publication Date: 24/03/2026 VMFT06.04

Dinacell Electrónica S.L. reserves the right to add, modify and/or delete content of the document without prior notice. The content indicated here should be used as general product information. It should not be interpreted as a guarantee of quality or durability. 3/3