SWK Data sheet

www.dinacell.com

SWK

Individual sensor for lift ropes

application

CSA B44.1/ASME A17.5

More information

SWK Load Sensor for lift ropes

These sensors are installed individually on the lift ropes to measure the load supported on each rope... AAA wide range of SWK covers rope diameter from 444 up to 111666 mm,,, each one with their respective nominal load. One of the most remarkable characteristics of this sensor is the fast and easy installation, by using Dinacell SW Tool or any standard tool. Other of its advantages is the capability of being installed in already fi nished installations. Dinacell SW Tool For a complete load weighing installation Standard Commercial Tool

These sensors have a USB connector output. This feature allows to use multiple-inputs in control unit, as OMEGA Control until, and be able to obtain individual information from each sensor. For installations with the special requirement of connecting a set of sensors to a load limiter with only one input, sets could be conformed with a (1) INTERFACE. This accessory provides a wired or USB output, which makes them suitable with any device, regardless of the load limiter input type.

(1) INTERFACE

1/3

SWK

D A

B Datasheet Specifi cations Parameter Units Specifi cations Models - Dimensional drawings (mm) and wiring diagram + Exc. Red + Signal Green - Exc. Black - Signal White E Shield (GND) C 4KWS 5KWS 6KWS 5.6KWS 8KWS 9KWS 01KWS 11KWS 21KWS 31KWS 41KWS 51KWS 61KWS Ø4 150 250 Ø5 130 200 300 Ø6 150 250 350 Ø6.5 200 250 400 Ø8 200 350 500 Ø9 250 400 550 N.L. for Rope Ø suggested Ø10 kg 300 450 650 NNN...LLL... for Rope ØØØ compatible Ø11 350 550 750 Ø12 450 650 900 Ø13 550 800 1050 Ø14 700 950 1200 Ø15 850 1100 1350 Ø16 1000 1250 Nominal Sensibility (N.S.) mV/V 1.3 ... 2.0 Accuracy - 0.25% Zero balance mV/V ± 0.20 Maximum excitation voltage V 12 Minimum distance to the socket m 25 Compensated -10 ... +40 (+14 ...+104) Temperature range Operating °C (°F) -20 ... +60 (-4 ... +140) Storage -20 ... +70 (-4 ... +158) Min. Insulation resistance (V.Test = 100V) GΩ 4 Input resistance Ω 350 ... 400 / 1000 ... 1100 Output resistance Ω 350 ±1.5 / 1000 ± 3 Safe 120 Load limit %N.L. Without characteristics loss 150 Type - 4 x 0.14mm2 Ø4.3 Connector - USB Cable Standard length m 2 Material - Polyurethane (PU) Material - Aluminum Sensor Surface treatment - Anodized Protection class - IP65 4KWS 5KWS 6KWS 5.6KWS 8KWS 9KWS 01KWS 11KWS 21KWS 31KWS 41KWS 51KWS 61KWS A 12.5 18 20 22 24 28 B 70 80 87 97 107 110 130 C 8 10 12 D 14 18.5 21 22.5 25 30.5 E 10 14 15.5 17.5 - 2/3

SWK

www.dinacell.com

Dinacell Electrónica S.L. Pol. Ind. Santa Ana, C/ de la Fundición 8 CP 28522 Rivas Vaciamadrid, Madrid, ESPAÑA Tel. (+34) 913 001 435 24/03/2026 5.32 24 Datasheet Product Reference Accessories: Dinacell SW tool SWK sensor set + JUNCTION BOX Accessory: INTERFACE 4 Parameter Units Specifi cations Model - INTERFACE 16.2 A Temperature range oC (oF) -20 ... +60 (-4 ... +140) B Casing material - Fireproof V0 C Protection class - IP50 Cable type - 4 x 0.22mm2 Ø4 Standard length m 5 + Ferrita Dimensions in mm USB Input - 6 12 USB A B C Wiring Wiring Cable Output - USB USB connection connection 6 48 69 74 Ref. - 007555 007274 007554 007275 12 84 105 110 For more information Certifi ed company Document Ref: D1068-08 Publication Date: VMFT06.04 Dinacell Electrónica S.L. reserves the right to add, modify and/or delete content of the document without prior notice. The content indicated here should be used as general product information. It should not be interpreted as a guarantee of quality or durability. ledoM .feR ... 053 ... 0001 Ω004 Ω0011 4KWS 302910 - 5KWS 516610 - 6KWS 891910 - 5.6KWS 090800 - 8KWS 111800 056230 9KWS 991910 - 01KWS 190800 156230 11KWS 211800 - 21KWS 641800 - 31KWS 290800 256230 41KWS 110900 - 51KWS 540900 - 61KWS 249800 129020 Ref. 002558 Pigtail length Standard length Protection Ref. Model Quantity of SWK (m) (m) class 021514 SWK10 6 021516 5 SWK13 0.5 2 IP65 021513 7 021517 SWK16 8 Accessory:: INTERFACE 3/3