SWC Data sheet

www.dinacell.com

SWC

Individual weighing sensor,

designed and manufactured to fi t each type of belt

More information

SWC Belt loading sensor

These sensors are individually installed on the elevator belts to measure the load supported on each belt... To cover the diff erent sizes of the belts,,, we design and manufacture this sensor with customized mesurements...

One of the most noteworthy features is the quick and easy installation,,, allowing it to be placed in fififi nished installations... On the other hand,,, its design incorporates two holes to adapt aaa commercial clamp with which to keep the sensor attached to the belt...

For aaa complete installation

This type of sensors have an output with USB connector... This feature allows these sensors to be used with multi---input equipment,,, such as OMEGA equipments,,, and thus obtain individual information from each Commercial sensor. fastening clamp For installations that require connecting aaa set of sensors to aaa limiter with aaa single input,,, groups can be formed by attaching these sensors to an INTERFACE (((111)))... These accessories off er connectorless or USB output,,, making them compatible with any computer,,, regardless of the input type of the limiter.

(((111))) INTERFACE

1/3

SWC

B Datasheet Specifications Parameter Units Specifications Model - SWC-350 SWC-500 SWC-700 32kN 350 - - Nominal Load (N.L.) 34kN - - kg 500 in relation to kN belt 43kN - - 64kN - - 700 Nominal Sensibility (N.S.) mV/V 1.3 ... 2.0 N.S difference between sensors %N.S. 2 Accuracy - 0.25% Zero balance mV/V ± 0.20 Maximum excitation voltage V 12 Minimum distance to the socket cm 25 Compensated -10 ... +40 (+14 ... +104) Temperature range Operating oC (oF) -10 ... +60 (+14 ... +140) Storage -20 ... +70 (-4 ... +158) Min. Insulation resistance (V.Test = 100V) GΩ 4 Input resistance Ω 350 ... 400 / 1000 ... 1100 Output resistance Ω 350 ± 1.5 / 1000 ± 3 Maximum 120 Load limit %N.L. Without characteristics loss 150 Type - 4 x 0.14mm2 Ø4.3 Termination - USB Cable Standard length m 0.75 / 2 Material - Polyurethane (PU) Material - Aluminum Sensor Surface treatment - Anodized Protection class - IP65 Dimensional drawings (mm) and wiring diagram D + Exc. Red + Signal Green - Exc. Black - Signal White Shield (GND) C SWC-350 SWC-500 SWC-700 A 20 B 69.8 93 C 10 *Dimensions depending on the thickness and width of the belt D 41.5 70 2/3

SWC

www.dinacell.com

Dinacell Electrónica S.L. Pol. Ind. Santa Ana, C/ de la Fundición 8 CP 28522 Rivas Vaciamadrid, Madrid, ESPAÑA Tel. (+34) 913 001 435 16/07/2026 5.32 24 Datasheet Product Reference Model SWC-350 SWC-500 SWC-700 0.75m 019614 015263 019615 Input resistance (350 ... 400) Cable Ref. 2m 023832 023833 023834 length Input resistance (1000 ... 1100) 0.75m 032143 032082 032083 Accessory::: INTERFACE 4 Parameter Units Specifi cations Model - INTERFACE Temperature range oC (oF) -20 ... +60 (-4 ... +140) Casing material - Fireproof V0 16.2 A Protection class - IP50 B Cable type - 4 x 0.22mm2 Ø4 C Standard length m 5 + Ferrita Dimensions in mm USB Input - 6 12 USB A B C Wiring Wiring Cable Output - USB USB connection connection 6 48 69 74 Ref. - 007555 007274 007554 007275 12 84 105 110 For more information Certifi ed company Document Ref: D1760-06 Publication Date: VMFT06.04 Dinacell Electrónica S.L. reserves the right to add, modify and/or delete content of the document without prior notice. The content indicated here should be used as general product information. It should not be interpreted as a guarantee of quality or durability. 3/3