GDCAN User manual

(EN)

GDCAN

User Manual

Dinacell Electrónica S.L.

Dinacell Electronica S.L. Product notice The information contained by the document is This manual describes the features that serve the subject to change without notice. The content product in its most up-to-date version. indicated herein should be used as an overview The resources included in this manual cater to the of the product. It should not be construed as different GDCAN gateway models. a guarantee of quality or durability. Dinacell Electronic shall not be liable for technical or editing errors or omissions contained in this document.

Document Ref.: D1780-01

Publication date: 24/07/2020

For more information www.dinacell.com

INDEX

1 Introduction .............................................................................. 4 1 . 1 G e n e r a l O v e r v i e w .......................................................................... 4 1.2 Main Characteristics ..................................................................... 4 1.3 CAN connection diagram ........................................................... 4

2 Technical data for the installation ............................................ 5 2.1 Dimensions and connections diagram ................................... 5

3 Device Installation ..................................................................... 6

3.1 Connect the gateway to the network...................................... 6 6 3.3 Linking to the SilosApp app ...................................................... 6 3.3 Linking to the SilosApp app ...................................................... 6 3.4 Connect the CAN........................................................................... 6 3.5 Access to the online app SilosApp........................................... 4 Linking to the SilosApp ............................................................. 7 4.1 Download the configurator ........................................................ 7 4.2 Connect and select the USB ...................................................... 7 4.3 Address and Baudrate ................................................................. 7 4.4. Registration form ......................................................................... 7

1 Introduction

1.1 General Overview

Device designed for the senditure of data from a CAN network to a remote server both via USB, GPRS or ETHERNET. Using this device on a CAN network, any installation can be monitored quickly, remotely and in real time.

It is compatible with Dinacell SilosApp solution. Combining this device with the SilosApp will give you full control of your installation remotely and in real time.

1.2 Main Characteristics

Parameter Units Specifications Model - GDCAN-GPRS GDCAN-ETHERNET

Power supply VDC 24 GPRS Wireless connectivity - ✓ - Ethernet connectivity Mbps - ✓

Connectivity Baud Rate kbps 50 / 125 / 250 / 500 BUS-CAN Maximum number of devices - 16 version CAN 2.0 connected to the CAN network Interface - Mini USB USB Connectivity Version - 2.0

1.3 CAN connection diagram

For installations with more than one MLS device connected to the CAN network, refer to the connection

diagram. The dashed lines represent the shield Device Device Device Device Gateway

4 WOL.C DNG CAN HGIH.C WOL.C DNG CAN HGIH.C WOL.C DNG CAN HGIH.C WOL.C DNG CAN HGIH.C WOL.C DNG CAN HGIH.C

2 Technical data for the installation

2.1 Dimensions and connections diagram

GDCAN-GPRS GDCAN-ETHERNET

1 2 5 3 1 2

3 GDCAN-GPRS GDCAN-ETHERNET

Component Description

(1) Mini USB connector - (2) CAN connector 24VD C C an H S IG HI H EL C D an L G O N W D

CAN connector detail ON Fixed GPRS communications module ON. (3) LED indicators Network Slow blinking Module registered in the telephone network. STA Blinking Device on. Fixed Established connection with the server GPRS Blinking Sending data. USB Fixed USB enabled. Fast blinking Network connection has been established, no server response. ETH Blinking Connection to the server has been established. (4) Nano SIM connector For GPRS connection (5) RJ45 connector For ETHERNET connection (6) End-of-line microswitch OFF position ON position

5 ATS HTE BSU 04 115 56 ON Network Ø8 STA GPRS USB Model Model 4 ON 6 OFF

3 Device Installation

3.1 Connect the gateway to the network

● For GDCAN-GPRS model only The first step is to insert a SIM card (Chapter 2.1, paragraph 4). Make sure the card is properly inserted.

The card must have PIN lock disabled. You can enter the card and disable PIN locking from a mobile phone.

● For GDCAN-ETHERNET model only

The first step is to connect the network cable to the RJ45 port on the gateway.

3.2 Connect the power supply

Connect the power supply of the device (Chapter 2.1, paragraph 2).

3.3 Linking to the SilosApp app

Everything you need to connect to the SilosApp app is explained in Chapter 4. The gateway cann not be connected to the CAN until the configuration is complete.

3.4 Connect the CAN

Finally connect the gateway to the CAN network (Chapter 2.1, paragraph 3) in order to start the senditure of data. ● For GDCAN-GPRS model only

If the device is positioned as the end of the line of the CAN installation, a resistance of 120 Ohm must be placed on the connector between the CAN High and CAN Low lines. ● For GDCAN-ETHERNET model only

If your device is positioned as end-of-line on a CAN network, switch your device microswitches to the ON position.

3.5 Access to the online app SilosApp

Visit the page below and enter your user details.

https://silos.dinacell.com

4 Linking to the SilosApp

4.1 Download the configurator www.dinacell.com Download the configurator by visiting

www.dinacell.com in the downloads section. The program does not require installation, after downloading, run and access the configurator.

4.2 Connect and select the USB 1 2

Connect the gateway to the device by using a mini USB to USB connection, once connected, notice the new COM ⌧1 that appears, select it and click the 2⌧ button.

4.3 Address and Baudrate

The next step is to verify that both the server address and baudrate are correct.

3 Server address: silos.sinacell.com 3 4 Baudrate by default: 50 4 Click the Save Settings button ⌧5 and click on 5 Register ⌧6 . 6 4.4. Registration form

Enter the User and Password that has previously been provided to you. Then click on Register ⌧7 .

Dinacell Electrónica S.L. Pol. Ind. Santa Ana C/ El Torno No8 CP 28522 Rivas Vaciamadrid, Madrid, ESPAÑA Tel. (+34) 913 001 435 Fax. (+34) 913 001 645 dinacell@dinacell.com www.dinacell.com