BTM Data sheet
Technical reference for BTM Data sheet with 3 pages, 2 tables, searchable navigation and precise source-page references.
- Chapters
- 1
- Pages
- 3
- Language
- English
- Format
Complete web edition
The complete manual in one reading flow
Pages follow the exact source order. Searchable text is also available for every page.
Complete document
Pages 1 to 3
Source page
Page 1
www.dinacell.com
BTM
BTM
The BTM's are plug & play sensors (factory adjusted) and are specially designed to measure belt tension. Its tightening system allows you to install and uninstall the sensors quickly and easily.
You can purchase these sensors in kit format. The use of these sensors together with the DELTA device makes this kit the perfect tool to measure and check the tension on belts. Min.
distance:
30 cm Sensor to check and measure tension on belts More information Sensor to measure tension on belts The BTM''s are plug && play sensors ((factory adjusted)) and are specially designed to measure belt tension.. Its tightening system allows you to Make the most out of your sensors You can purchase these sensors in kit format.. The use of these sensors Min.. distance:: 3300 cm Sensor to check and measure Plug & Play Factory adjusted
1/3
Source page
Page 2
BTM
91.9 23 30 38.9 32.5 30
60
571 27
27
5.81 Datasheet Specifications Parameter Units Specifications Model - BTM Nominal Load (N.L.) kg 380 740 400 500 640 800 980 Features with a belt- tension measurement Maximum workload - 150% device Accuracy - 1% Minimum Breakage Load kN 32 64 34 43 52 68 85 Elevator belt Width mm 30 60 25 30 36 38 48 characteristics Thickness mm 3 3.3 4.6 Minimum recommended distance to belt terminal cm 30 Maximum excitation voltage V 12 Compensated -10 ... +40 (+14 ... +104) Temperature range Operating °C (°F) -20 ... +60 (-4 ... +140) Storage -20 ... +70 (-4 ... +158) Min. Insulation resistance (V.Test = 100V) GΩ 4 Input resistance Ω 350 ... 450 Output resistance Ω 350 Load limit Without characteristics loss kg 1600 Standard length mm 2 Cable Connector - USB Material - Polyurethane (PU) Material - Aluminum Sensor Surface treatment - Anodized Protection class - IP50 Dimensional drawings (mm) and wiring diagram 78 2/3
| - | Column | Column | Column | Column | Column | Column |
|---|---|---|---|---|---|---|
| kg | 380 | 740 | 400 | 500 | 640 | 800 |
| - | ||||||
| - | ||||||
| kN | 32 | 64 | 34 | 43 | 52 | 68 |
| mm | 30 | 60 | 25 | 30 | 36 | 38 |
| mm | 3 | 3.3 | ||||
| cm | ||||||
| V | ||||||
| °C (°F) | ||||||
| GΩ | ||||||
| Ω | ||||||
| Ω | ||||||
| kg | ||||||
| mm | ||||||
| - | ||||||
| - | ||||||
| - | ||||||
| - | ||||||
| - |
Source page
Page 3
Datasheet BTM
Product Reference
Ref. Model 018248 BTM
Kit reference
Quantity Ref. BTM DELTA 8S 021924 2 021923 3 1 021922 4 021921 5
For more information
www.dinacell.com Certifi ed company Dinacell Electrónica S.L. Pol. Ind. Santa Ana, C/ de la Fundición 8 CP 28522 Rivas Vaciamadrid, Madrid, ESPAÑA Tel. (+34) 913 001 435 Document Ref: D1882-04 Publication Date: 17/07/2026 VMFT06.04
Dinacell Electrónica S.L. reserves the right to add, modify and/or delete content of the document without prior notice. The content indicated here should be used as general product information. It should not be interpreted as a guarantee of quality or durability. 3/3
| BTM |
|---|
| 2 |
| 3 |
| 4 |
| 5 |
Technical data
Highlighted specifications
| Specification | Value | Page |
|---|---|---|
| kN | 32 | 64 | 34 | 43 | 52 | 68 | 2 |
Document editions