BPPLR Data sheet
Technical reference for BPPLR Data sheet with 3 pages, 4 tables, searchable navigation and precise source-page references.
- Chapters
- 1
- Pages
- 3
- Language
- English
- Format
Complete web edition
The complete manual in one reading flow
Pages follow the exact source order. Searchable text is also available for every page.
Complete document
Pages 1 to 3
Source page
Page 1
www.dinacell.com
BPPLR
Load cell specially designed for
the installation under cabin chassis
More information
BPPLR Compression load cell
The BPPLR is aaa sensor solution to be installed under the lift cabin... The sensors are installed on the center of the lift chassis and receive the weight pressure of the cabin fl oor.
The BPPLR design embodies a base to be anchor to the chassis and on the head of the sensor, it is equipped with a silent-block to avoid possible cabin vibrations.
This type of compression sensors provides great reliability and enormous mechanical robustness supporting loads of up to three tons.
CABIN For a complete installation
These types of sensors are placed in the elevator chassis and have an USB or 5 cable output termination. For installations that requires more than one sensor, it is possible to connect the sensors to a (1) INTERFACE that also off ers the possibility of USB output or 5 wires termination (depending on the type of the unit controllers input). CHASSIS
(1) INTERFACE
1/3
Source page
Page 2
BPPLR
100 = 80 =
04
Ø60 Ø8.5 06
6± 5.95 = 21 )6±( 02 5 Datasheet Specifications Parameter Units Specifications Model - BPPLR Nominal Load (N.L.) t 1.2 2 3 Nominal Sensibility (N.S.) mV/V 1.4 ... 2.0 Accuracy - 0.4% Zero balance mV/V ±0.2 Maximum excitation voltage V 12 Compensated -10 ... +40 (+14 ... +104) Temperature range Operating oC (oF) -20 ... +60 (-4 ... +140) Storage -20 ... +70 (-4 ... +158) Min. Insulation resistance (V.Test = 100V) GΩ 4 Input resistance Ω 350±3 Output resistance Ω 350±2 Load limit Safe %N.L. 150 Type - 4 x 0.22mm2 Ø6 Termination - Wiring connection / USB Cable Standard length m 4 Material - Polyurethane (PU) Material - Alloy steel Sensor Surface treatment - Chemical nikel Protection class - IP66 Dimensional drawings (mm) and wiring diagram + Exc. Red + Signal Green - Exc. Black - Signal White Shield (GND) 2/3
| - | Column | Column |
|---|---|---|
| t | 1.2 | 2 |
| mV/V | ||
| - | ||
| mV/V | ||
| V | ||
| oC (oF) | ||
| GΩ | ||
| Ω | ||
| Ω | ||
| %N.L. | ||
| - | ||
| - | ||
| m | ||
| - | ||
| - | ||
| - | ||
| - |
Source page
Page 3
BPPLR
www.dinacell.com
Dinacell Electrónica S.L. Pol. Ind. Santa Ana, C/ de la Fundición 8 CP 28522 Rivas Vaciamadrid, Madrid, ESPAÑA Tel. (+34) 913 001 435 24/04/2026 5.32 24 Datasheet Product Reference Ref. Cable termination N.L. (t) Model 001019 Wiring connection 1.2 011265 USB 022585 Wiring connection 2 BPPLR 013808 USB 003758 Wiring connection 3 013807 USB Accessory: INTERFACE 4 Parameter Units Specifi cations Model - INTERFACE 16.2 A Temperature range oC (oF) -20 ... +60 (-4 ... +140) B Casing material - Fireproof V0 C Protection class - IP50 Cable type - 4 x 0.22mm2 Ø4 Standard length m 5 + Ferrita Dimensions in mm USB Input - 6 12 USB A B C Wiring Wiring Cable Output - USB USB connection connection 6 48 69 74 Ref. - 007555 007274 007554 007275 12 84 105 110 For more information Certifi ed company Document Ref: D1028-06 Publication Date: VMFT06.04 Dinacell Electrónica S.L. reserves the right to add, modify and/or delete content of the document without prior notice. The content indicated here should be used as general product information. It should not be interpreted as a guarantee of quality or durability. 3/3
| Wiring connection | 1.2 |
|---|---|
| USB | |
| Wiring connection | 2 |
| USB | |
| Wiring connection | 3 |
| USB |
| - | Column | Column | Column |
|---|---|---|---|
| oC (oF) | |||
| - | |||
| - | |||
| - | |||
| m | |||
| - | 6 | ||
| - | USB | Wiring connection | USB |
| - | 007555 | 007274 | 007554 |
| A | B |
|---|---|
| 48 | 69 |
| 84 | 105 |
Document editions